DISASSEMBLY AND REASSEMBLY

Post-installation operation

Transmitter operation check

			Disassembly steps
		1.	Screw
		2.	Upper cover
		3.	Transponder
		4.	Transmitter assembly
<<A>>	>>A<<	5.	Battery
		6.	Master key

DISASSEMBLY SERVICE POINT

<<A>> BATTERY REMOVAL

caution

Do not allow water or dust to enter the inside of the transmitter assembly when it is open. Also, do not touch the precision electronic device.

REASSEMBLY SERVICE POINT

>>A<< BATTERY INSTALLATION

caution

Do not allow water or dust to enter the inside of the transmitter assembly when it is open. Also, do not touch the precision electronic device.

Install a battery to the transmitter assembly with its (+) side facing towards the upper cover side.
Battery required for replacement: Coin type battery CR1616