|
If a door window glass wrongly, automatically lowers while being raised, adjust or replace it as follows:
|
|
1.Remove a door trim assembly (Refer to GROUP 52A - Door Trim ).
|
|
2.Remove a waterproof film (Refer to ).
|
|
3.Remove a door speaker cover and door speaker bracket <Vehicles with audio amplifier> (Refer to ).
|
|
4.Remove a window regulator assembly (Refer to ).
|
|
5.Raise and lower the door window glass by hand to check the operation force.
|
|
6.If the door window glass does not move up and down smoothly, check and repair as follows:
- Check the installation condition of a door window glass runchannel.
- Check a door sash for twist and bend.
- Check the installation condition of a lower sash.
7.If repair or adjustment is impossible, replace the door assembly (Refer to ).
|