CUSTOMISATION FUNCTION


By operating the M.U.T.-III ETACS system, the following functions can be customised. The programmed information is held even when the battery is disconnected.
Adjustment item (M.U.T.-III display)
Adjustment item
Adjusting content (M.U.T.-III display)
Adjusting content
Auto door unlock
Adjustment of the auto door unlock function
Disable
Without function <M/T, A/T, CVT> (initial condition)
Always (P pos)
With function: Operates when the shift lever or the selector lever is moved to the P position. <A/T, CVT>
Always(Lock pos)
With function: Operates when the ignition switch is moved to the LOCK (OFF) position. <M/T, A/T, CVT>
Door unlock mode
Adjustment of power door locks with selective unlocking <Vehicles without dead lock system>
All Doors Unlock
Without function: The first operation of keyless entry system or unlock operation by KOS unlocks all doors (initial condition).
Dr Door Unlock
With function: The first operation of keyless entry system or unlock operation by KOS unlocks the driver’s door only, and the second unlock operation within 2 seconds after that unlocks all doors.
Deadlock Button Operation
Adjustment of the dead lock system setting procedure <vehicles with dead lock system>
Twice
Operate the lock switch of the keyless entry system or KOS twice.(initial condition)
Once
Operate the lock switch of the keyless entry system or KOS once.
Timer lock timer
Timer lock period adjustment
30 sec.
30 seconds (initial condition)
60 sec.
60 seconds
120 sec.
120 seconds
180 sec.
180 seconds