DATA LIST REFERENCE TABLE


Item No.
Check item
Check condition
Normal condition
1
Engine switch(1)
When the engine switch is pressed
ON
When the engine switch is not pressed
OFF
2
Engine switch(2)
When the engine switch is pressed
ON
When the engine switch is not pressed
OFF
3
Stop lamp switch
When the brake pedal is depressed
ON
When the brake pedal is released
OFF
8
P range detect SW
Shift the selector lever to the position other than the P position.
Outside park
Shift the selector lever to the P position.
Park
9
ESL drive permission signal(KOS)
After starting the engine
OFF
Other than above
ON
13
Cranking signal output(monitor)
Cranking
ON
Other than above
OFF
15
IG1 output (monitor)
Power supply mode is turned ON or the engine is being started by the pressing of engine switch.
ON
Other than above
OFF
16
IG2 output (monitor)
Power supply mode is turned ON.
ON
Other than above
OFF
17
OSS power supply status*
Power supply mode is abnormal.
Default or SNA
Power supply mode is OFF.
IG OFF
Power supply mode is ACC.
IG ACC
Power supply mode is ON.
IG ON
Ignition switch ON
IG START
Ignition switch ON
IG RUN(judging)
18
+B1 Power supply voltage (AD)
Always
System voltage
19
+B2 Power supply voltage (AD)
Always
System voltage
20
ESL unlock SW(1)
Unlock SW (1) is abnormal.
Default or SNA
Electric steering lock: Unlock
ON
Electric steering lock: Lock
OFF
21
ESL lock SW
Lock SW is abnormal.
Default or SNA
Electric steering lock: Unlock
OFF
Electric steering lock: Lock
ON
22
ESL unlock SW(2)
Unlock SW (2) is abnormal.
Default or SNA
Electric steering lock: Unlock
ON
Electric steering lock: Lock
OFF
23
ESL status
Electric steering lock is abnormal.
Default or SNA
Electric steering lock: Lock or unlock drive
Driving
Electric steering lock is not in operation.
Stop
Electric steering lock is in fail-safe operation.
Fail
note
  • *: Indicates the output status of OSS-ECU.