ANTENNA COMMUNICATION TEST

Through the operations on the M.U.T.-III screen, the antenna communication tests can be performed.

note

For details on how to use the M.U.T.-III, refer to the "M.U.T.-III User’s Manual."

1.Start the M.U.T.-III system on the PC
2.Select "KOS/IMMO/Keyless" button from the "System Select" screen. Then, select the applicable option code item and push the OK button.
3.Select "Special Function" on the next screen.

4.Select "Comm. Test" on the "Special Function" screen.

5.Select the antenna to be tested on "Comm. Test" screen, and press the OK button with the keyless operation key placed within the communication operational area.
6.Push the OK button after "Communication is normal." is displayed.