Item
|
Display contents
|
Factor
|
Immobilizer error
|
|
IMMOBILIZER SYSTEM SERVICE REQUIRED
|
- Displayed when the certification
communication fails with KOS, electrical steering lock, or engine-ECU.
- Displayed when the power supply mode is turned ON while the keyless operation key
is judged to be brought outside the vehicle with the power supply mode in ACC, or when the engine
starting operation is performed after such a status.
- Displayed when the electrical steering lock cannot be locked because there is a
P detection switch malfunction.
|
Steering turn indication
|
|
PUSH ENGINE SWITCH WHILE TURNING STEERING WHEEL
|
Displayed when the steering lock is not unlocked because the steering
force is applied.
|
Electrical steering lock malfunction
|
|
STEERING LOCK SERVICE REQUIRED
|
Displayed when a malfunction occurs to the steering lock system.
|
Shift P indication
|
|
SHIFT TO P POSITION
|
Displayed if the shift lever is in other than "P" range when the engine
is not running.
|
Steering lock not locked
|
|
STEERING WHEEL UNLOCKED
|
Displayed when the door is open with the steering lock not locked.
|
Power supply system error
|
|
ELECTRICAL SYSTEM SERVICE REQUIRED
|
Displayed when an error occurs to the power supply system.
|
Engine starting method
|
|
PRESS BRAKE PEDAL TO START ENGINE
|
Displayed when the shift lever is in other than "P" range or "N" range
at the engine start, or when the engine switch is pressed without the brake pedal depressed.
|
Power OFF indication
|
|
-
|
Displayed when the door is open with the power supply mode in ON
or in ACC.
|