POWER DOOR LOCKS WITH SELECTIVE UNLOCKING INSPECTION


Check the power door locks with selective unlocking as described below. If it does not work, perform troubleshooting (Refer to ).
note The setting of the power door locks with selective unlocking can be changed using the customisation function. Confirm which setting is activated before performing these checks. Refer to .

  • Press the unlock switch on the keyless operation key once to unlock only the driver’s door. Press the unlock switch of the keyless operation key once again within 2 seconds after the driver’s door is unlocked, and check that the front passenger’s door, rear doors, and tailgate are unlocked.
    note Press the unlock switch on the keyless operation key once to unlock only the driver’s door. When the unlock switch of the keyless operation key is pressed once again more than 2 seconds after the driver’s door is unlocked, only the driver’s door is unlocked.
  • Press the lock and unlock switch on the door outside handle (driver’s side) once to unlock only the driver’s door. Press the lock and unlock switch of the door outside handle (driver’s side) once again within 2 seconds after the driver’s door is unlocked, and check that the front passenger’s door, rear doors, and tailgate are unlocked.
    note Press the lock and unlock switch on the door outside handle (driver’s side) once to unlock only the driver’s door. When the lock and unlock switch of the door outside handle (driver’s side) is pressed once again more than 2 seconds after the driver’s door is unlocked, only the driver’s door is unlocked.