Tool
|
Number
|
Name
|
Use
|
|
MB992326
|
Adjustment tool, washer nozzle
|
Injection angle adjustment of the washer nozzle
|
|
- MB992744
- MB992745
- MB992746
- MB992747
- MB992748
|
- Vehicle communication interface-Lite (V.C.I.-Lite)
- V.C.I.-Lite main harness A (for vehicles with CAN communication)
- V.C.I.-Lite main harness B (for vehicles without CAN communication)
- V.C.I.-Lite USB cable short
- V.C.I.-Lite USB cable long
|
|
|
MB991955
a: MB991824 b: MB991827 c: MB991910 d: MB991911 e: MB991825 f: MB991826
|
M.U.T.-III sub-assembly
a: Vehicle Communication Interface (V.C.I.) b: M.U.T.-III USB cable c: M.U.T.-III main harness A (Vehicles with CAN communication system) d: M.U.T.-III main harness B (Vehicles without CAN communication system) e: M.U.T.-III measure adapter f: M.U.T.-III trigger harness
|
caution |
For vehicles with CAN communication,
use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main
harness B instead, the CAN communication does not function correctly.
|
Checking windshield wiper intermittent time Lighting control sensor (rain sensor) adaptation
|
|
MB991223
a: MB991219 b: MB991220 c: MB991221 d: MB991222
|
Harness set
a: Check harness b: LED harness c: LED harness adapter d: Probe
|
Continuity check and voltage measurement at harness wire or connector
a: For checking connector pin contact pressure b: For checking power supply circuit c: For checking power supply circuit d: For connecting a locally sourced tester
|
|
MB992006
|
Extra fine probe
|
Continuity check and voltage measurement at harness wire or connector
|