|
|
Apply the specified sealant to the roof drip moulding clip surface, and install the roof drip moulding clip.
|
|
|
Specified Adhesive: 3M-DP-8010 or equivalent
|
|
|
1.Remove any remnants of the old tape. Then degrease the adhesion surface by using a cloth moistened with Mitsubishi Genuine Parts Cleaner (MZ100387).
|
|
|
2.Apply the specified adhesive to the adhesion surface of the roof moulding clip.
Specified adhesive: 3M-DP-8010 or equivalent
|
|
3.Adhere the roof drip moulding clip as shown.
4.Wait for at least 10 minutes. Then install the roof drip moulding.
|
))
)
)