REMOVAL AND INSTALLATION


Pre-removal and post-installation operation
  • Washer tank removal and installation (Refer to .)
  • Washer motor removal and installation.)




Rear washer nozzle removal step


1.
 Rear washer nozzle assembly



Rear wiper blade removal steps


2.
 Rear wiper blade assembly

>>A<<
 3.
 Rear wiper blade



Rear wiper motor removal steps


4.
 Cover

>>B<<
 5.
 Rear wiper arm assembly


·
 Tailgate trim (Refer to GROUP 52A, Tailgate Trim )


6.
 Grommet


7.
 Rear wiper motor assembly


8.
 Rear wiper motor bracket



Rear washer hose removal steps


·
 Front/rear scuff plate, cowl side trim, quarter trim (Refer to GROUP 52A, Interior Trim )


·
 Tailgate trim (Refer to GROUP 52A, Tailgate Trim )


9.
 Rear washer hose
note For removal and installation of the wiper and washer switch, refer to GROUP 54A, Column Switch .

INSTALLATION SERVICE POINTS

>>A<< REAR WIPER BLADE INSTALLATION

caution Use a curved backing like that shown for the backing of a wiper blade to ensure sustained wiper wiping performance.

>>B<< REAR WIPER ARM AND BLADE ASSEMBLY INSTALLATION

Assemble the wiper blade so that their edge stops at the specified position.
Standard value:
(A): Φ 2 marking ± 5 mm