TROUBLE SYMPTOM CHART



TROUBLE SYMPTOM
Inspection procedure No.
Reference page
The windshield wipers do not work at all.
1

The windshield wipers do not work when the wiper switch is at the "INT", "Washer" or "Mist" position. However, the wipers work at low speed when the switch is at the "Lo" and "Hi" position.
2

The windshield wipers do not stop at the specified park position.
3

The windshield wipers do not work normally.
4

The windshield intermittent wiper interval cannot be adjusted by operating the windshield intermittent wiper volume control.
5

The intermittent wiper interval is not changed according to the vehicle speed.
6

The rain sensitive AUTO wiper function does not work at all <Vehicles with lighting control sensor>.
7

The rain sensitive AUTO wiper function works even though there is no rainfall <Vehicles with lighting control sensor>.
8

Sometimes the rain sensitive AUTO wiper function works even though there is no rainfall <Vehicles with lighting control sensor>.
9

The windshield washer does not work.
10

The comfort washing function does not work normally
11

Delayed finishing wipe function does not work normally.
12

The rain sensitive AUTO wiper function does not work at all <Vehicles with LDW camera (rain sensor)>.
13

Sometimes the rain sensitive AUTO wiper function works even though there is no rainfall <Vehicles with LDW camera (rain sensor)>.
14

note If the ETACS-ECU failed, the windshield wiper will operate only at low speed as a fail-safe measure.