CUSTOMISATION FUNCTION


By operating the M.U.T.-III ETACS system, the following functions can be customised. The programmed information is held even when the battery is disconnected.
Adjustment item (M.U.T.-III display)
Adjustment item
Adjusting content (M.U.T.-III display)
Adjusting content
Front wiper operation
Adjustment of the intermittent windshield wiper operation <vehicles without lighting control sensor or vehicles without LDW>
Normal INT
Intermittent wiper interval is fixed to 4 seconds.
Variable INT
Intermittent wiper interval is calculated only by the wiper volume control.
Speed Sensitive
Intermittent wiper interval is calculated according to the intermittent wiper volume control and vehicle speed (initial condition).
Adjustment of the intermittent windshield wiper operation <vehicles with lighting control sensor or vehicles with LDW>
Normal INT
Intermittent wiper interval is fixed to 4 seconds.
Variable INT
Intermittent wiper interval is calculated only by the wiper volume control.
Speed Sensitive
Intermittent wiper interval is calculated according to the intermittent wiper volume control and vehicle speed.
Rain Sensitive
Intermittent wiper interval is calculated according to the intermittent wiper volume control and lighting control sensor (initial condition).
Front/rear wiper washer
Disabling or enabling washer-linked wiper function
Only Washer
No function
Washer & Wiper
With function: Without delayed finishing wipe function <Initial condition (vehicles for RUSSIA)>
With after wipe
With function: With delayed finishing wipe function <Initial condition (except vehicles for RUSSIA)>