REMOVAL AND INSTALLATION



The following bolts and screws are used for installing the instrument panel: The bolts and screws are indicated by symbols in the illustrations in sections "REMOVAL AND INSTALLATION" and "DISASSEMBLY AND ASSEMBLY."
Name
Symbol
Size (D × L) mm
Colour
Shape
Tapping screw
a
5 × 14
-


b
5 × 16
-


Bolt with washer
c
6 × 16
-


caution
  • For the removal of the front passenger’s air bag module, refer to GROUP 52B - Service Precautions , Driver’s and Front Passenger’s Air Bag Module, and Clock Spring before operation.
  • Do not subject SRS-ECU to any shocks when removing or installing the instrument panel.




Removal steps


1.
Steering column upper cover


2.
Steering column lower cover


3.
Ignition key cover


4.
Centre panel assembly


5.
Radio and CD player assembly


6.
Hazard indicators assembly


7
Heater controller assembly (Refer to GROUP 55 - Heater control unit .)


8.
Side air outlet panel assembly


9.
Combination meter bezel


10.
Bottom cover assembly (driver’s side)


11.
Side cover


12.
Instrument panel lower <Vehicles with Knee air bag>


13.
Centre lower panel assembly


14.
Instrument panel lower RH <Vehicles with Knee air bag>


15.
Instrument panel lower <Vehicles without Knee air bag>


·.
Front floor console assembly (Refer to ).


16.
Centre lower box assembly


17.
Bottom cover assembly (passenger’s side)


18.
Glove box


19.
Glove box assembly


20.
Ornament panel assembly


·
Glove box lamp connector


·
Passenger’s (front) air bag module connector connection (Refer to GROUP 52B - Passenger’s (front) air bag module .)


·
Front pillar trim (Refer to ).


21.
Instrument panel assembly

CLIP AND CLAW POSITIONS




note Each number in the illustration indicates a part number.