Tool
|
No.
|
Name
|
Use
|
|
- MB992744
- MB992745
- MB992746
- MB992747
- MB992748
|
- Vehicle communication interface-Lite
(V.C.I.-Lite)
- V.C.I.-Lite main harness A (for vehicles with CAN communication)
- V.C.I.-Lite main harness B (for vehicles without CAN communication)
- V.C.I.-Lite USB cable short
- V.C.I.-Lite USB cable long
|
Checking diagnosis code
|
|
MB991955
a: MB991824 b: MB991827 c: MB991910 d: MB991911 e: MB991825 f: MB991826
|
M.U.T.-III sub-assembly
a: Vehicle communication interface (V. C. I.) b: M.U.T.-III USB cable c: M.U.T.-III main harness A (applicable to vehicles with CAN communication) d: M.U.T.-III main harness B (applicable to vehicles without CAN communication) e: M.U.T.-III Measure adapter f: M.U.T.-III Trigger harness
|
caution |
For vehicles with CAN communication,
use the M.U.T.-III main harness A to send simulated vehicle speed. If you connect the M.U.T.-III
main harness B instead, the CAN communication does not function correctly.
|
Checking diagnosis code
|
|
MB991865
|
Dummy resistor
|
Circuit check
|
|
MB991866
|
Resistor harness
|
Driver’s and passenger’s (front) air bag and side-airbag
circuit check
|
|
MB991884
|
Resistor harness
|
Seat belt pre-tensioner, lap pre-tensioner and curtain air bag circuit
check
|
|
MB991885
|
Adapter harness
|
Deployment of seat belt pre-tensioner, lap pre-tensioner and curtain
air bag inside or outside the vehicle
|
|
MB992102
|
Adapter harness
|
Deployment of driver’s and passenger’s (front)
air bag inside or outside the vehicle
|
|
MB990784
|
Ornament remover
|
Removal of cover.
|
|
MB990803
|
Steering wheel puller
|
Steering wheel disconnection
|
|
MB991223
a: MB991219 b: MB991220 c: MB991221 d: MB991222
|
Harness set
a: Check harness b: LED harness c: LED harness adapter d: Probe
|
Checking the continuity and measuring the voltage at the SRS-ECU
harness connector
|
|
MB992006
|
Extra fine probe
|
Continuity check and voltage measurement at harness wire or connector
|