|
caution |
Do not insert a test probe into the terminal from its front side
directly as the connector contact pressure may be weakened.
|
Switch position
|
Tester connection
|
Specified condition
|
ON position
|
1 -
2
|
820 ±
82 Ω
|
OFF position
|
1 -
2
|
Continuity (Less than 2 Ω)
|
|
|
1.Remove the centre panel assembly (Refer to GROUP 52A -
Instrument panel
assembly ).
|
|
2.Connect the positive battery terminal with the centre panel connector terminal No. 1.
Then, check if the passenger’s air bag OFF indicator lamp is illuminated when the negative battery
terminal and the centre panel connector terminal No. 7 are connected. 3.When the passenger’s air bag OFF indicator lamp is illuminated, the result
is judged as good.
|
|
1.Remove the centre panel assembly (Refer to GROUP 52A -
Instrument panel assembly ).
|
|
2.Connect the positive battery terminal with the centre panel connector terminal No. 1.
Then, check if the passenger’s air bag ON indicator lamp is illuminated when the negative battery
terminal and the centre panel connector terminal No. 18 are connected. 3.When the passenger’s air bag ON indicator lamp is illuminated, the result
is judged as good.
|