Never measure the knee air bag module circuit resistance even with the specified tester.
Measuring the circuit resistance with a tester causes accidental air bag deployment due to current
that flows or static, resulting in serious personal injury.
When replacing the parts, discard the old parts after deploying the air bag according
to the specified procedure (Refer to ).
There must be no abnormality to the knee air bag deployment section of headlining.
If any malfunction is found in the following inspections, replace with a new knee air
bag module.
1.Crack, dent or deformation to inflator surface 2.Torn air bag 3.Damaged connector, deformation of terminal, and harness binding