CUSTOMISATION FUNCTION


By operating the M.U.T.-III ETACS system, the following functions can be customised. The programmed information is held even when the battery is disconnected.
Adjustment item (M.U.T.-III display)
Adjustment item
Adjusting content (M.U.T.-III display)
Adjusting content
Turn power source
Adjustment of turn-signal lamp operation condition
ACC or IG1
Operable with ACC or ON position
IG1
Operable with ON position (initial condition)
Comfort flasher
With/without comfort flasher function
Disable
No function
Enable
With function (initial condition)
Comfort flasher switch time
Switch operation time to activate the comfort flasher function
Normal
0.4 second (initial condition)
Long
0.8 second
Hazard answer back
Adjustment of the number of keyless hazard warning lamp answer back flashes
Lock:1, Unlock:2
LOCK: Flashes once, UNLOCK: Flashes twice (initial condition)
Lock:1, Unlock:0
LOCK: Flashes once, UNLOCK: No flash
Lock:0, Unlock:2
LOCK: No flash, UNLOCK: Flash twice
Lock:2, Unlock:1
LOCK: Flash twice, UNLOCK: Flash once
Lock:2, Unlock:0
LOCK: Flash twice, UNLOCK: No flash
Lock:0, Unlock:1
LOCK: No flash, UNLOCK: Flash once
Lock:0, Unlock:0
No function
Sensitivity for auto lamp
Photo sensor sensitivity (illumination intensity) <vehicles with photo sensor>
Level 1 bright
High ambient brightness
Level 2 bright
Standard ambient brightness (initial condition)
Level 3
Low ambient brightness
Level 4 dark
Low-low ambient brightness
Lighting control sensor sensitivity (illumination intensity) <vehicles with lighting control sensor or vehicles with LDW>
Level 1 bright
High-high ambient brightness
Level 2 bright
High ambient brightness
Level 3
Standard ambient brightness (initial condition)
Level 4 dark
Low ambient brightness
Level 5 dark
Low-low ambient brightness
Auto lamp linked wiper
Presence of wiper-linked auto lamp function <vehicles with photo sensor>
Disable
No function (initial condition)
Enable
With function
Head lamp auto cut customise
Adjustment of headlamp automatic shutdown function
Disable
No function
Enable (B-spec.)
With function (initial condition)
Coming home light
Disabling or enabling coming home light function
Disabled
No function
15 sec.
The headlamps illuminate for 15 seconds.
30 sec.
The headlamps illuminate for 30 seconds. (initial condition)
60 sec.
The headlamps illuminate for 60 seconds.
180 sec.
The headlamps illuminate for 180 seconds.
Welcome light
Disabling or enabling welcome light function
Disabled
No function
Small lamp
The tail lamps illuminate. <initial condition>
Head lamp
The headlamps illuminate.