DISASSEMBLY AND REASSEMBLY



Disassembly steps <Halogen type>


1.
 Front turn-signal lamp bulb


2.
 Socket cover
<<A>>
3.
 Headlamp bulb (high-beam)


5.
 Socket cover


6.
 Position lamp bulb
<<A>>
7.
 Headlamp bulb (low-beam)


11.
 Headlamp body



Disassembly steps <Discharge type>


1.
 Front turn-signal lamp bulb


2.
 Socket cover
<<A>>
3.
 Headlamp bulb (high-beam)


4.
 Position lamp bulb


5.
 Socket cover
<<B>>
8.
 Headlamp control unit (socket)
<<B>>
9.
 Headlamp bulb (low-beam)


10.
 Headlamp control unit


11.
 Headlamp body

DISASSEMBLY SERVICE POINTS

<<A>> HEADLAMP BULB REMOVAL
caution Do not touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, immediately clean it with alcohol or thinner. After drying completely, install the bulb.

<<B>> HEADLAMP CONTROL UNIT (SOCKET) / HEADLAMP BULB REMOVAL
1.Twist the socket anticlockwise to disconnect it from the bulb.
2.
caution Do not touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, immediately clean it with alcohol or thinner. After drying completely, install the bulb.
Raise the fastener securing the bulb, and then remove the bulb.