DIAGNOSIS CODE CHART


caution
  • On troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), diagnosis code(s) associated with other system may be set. On completion, confirm all systems for diagnosis code(s). If diagnosis code(s) are set, erase them all.
  • Before or after the troubleshooting, check the operation of the headlamp automatic levelling system. Refer to .
Diagnosis code No.
 Diagnostic item
 Reference page
B2215
 ECU internal error (EEPROM)
 Refer to Diagnosis code chart .
B222C
 Coding not completed
B2510
 Height Sensor Not Initialized
B2513
 Levelling actuator output voltage
B2514
 Height sensor supply voltage
B2515
 Front height sensor signal
B2516
 Rear height sensor signal
U0100
 Engine CAN timeout
 Refer to Diagnosis code chart .
U0121
 ABS/ASC CAN timeout
U0155
 Meter CAN timeout
U0331
 ECU internal error (ROM)