With this inspection, it is simply checked that the headlamp automatic levelling motor incorporated in the headlamp assembly moves in accordance with the vehicle posture.
INSPECTION PROCEDURE
1.Park the vehicle on a level surface. 2.Turn the ignition switch to "ON" position. (Do not start up the engine.) 3.At the front or rear jack up point, raise the front wheels or rear wheels off the earth. 4.Turn ON the headlamp switch. 5.When the front wheels are raised, the upward headlamp beam is controlled with the control value applicable to the present vehicle posture, and the headlamp beam moves downward. 6.When the rear wheels are raised, the downward headlamp beam is controlled with the control value applicable to the present vehicle posture, and the headlamp beam moves upward.