REMOVAL AND INSTALLATION

FRONT FOG LAMP

Post-installation Operation

Front Fog Lamp Aiming Adjustment (Refer to ).

			Removal steps
		1.	Front fog lamp bezel
	>>A<<	2.	Front fog lamp assembly
<<A>>		3.	Front fog lamp bulb
<<A>>		4.	Daytime running lamp
		5.	Front fog lamp unit

REMOVAL SERVICE POINT

<<A>> FRONT FOG LAMP BULB/DAYTIME RUNNING LAMP REMOVAL

caution

Do not touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, immediately clean it with alcohol or thinner. After drying completely, install the bulb.

INSTALLATION SERVICE POINT

>>A<< FRONT FOG LAMP ASSEMBLY INSTALLATION

Tighten the mounting screws to the specified torque in the order shown.
Tightening torque: 1.2 ± 0.7 N·m