| caution | During diagnosis, a diagnosis code associated with other system
may be set when the ignition switch is turned on with connector(s) disconnected. On completion,
confirm all systems for diagnosis code(s). If diagnosis code(s) are set, erase them all. |
| Trouble symptom |
Inspection procedure No. |
Reference page |
| The ignition key cylinder illumination lamp does not illuminate/extinguish normally. |
1 |
|
| Malfunction of the ignition switch power supply system. |
2 |
|
| Even when the selector lever is in the P position, the ignition switch cannot
be turned to the LOCK (OFF) position. / When the selector lever is in other than the
P position, the ignition switch can be turned to the LOCK (OFF) position. |
3 |
|