COLUMN SWITCH BODY CONTINUITY CHECK



  1. Remove the lighting switch and wiper/washer switch (Refer to ).
  2. Check that the continuity is present for the same terminal numbers (No. 2-11) of the column switch body connectors that remain on the steering column.

Column switch body
 Terminal number
 Normal condition
Lighting switch side connector
Wiper/washer switch side connector
 2 - 2
3 - 3
4 - 4
5 - 5
6 - 6
7 - 7
8 - 8
9 - 9
10 - 10
11 - 11
 Continuity exists (2 Ω or less)