AUDIO ERROR CODES <VEHICLES WITHOUT DISPLAY AUDIO>

Error code		Cause	Cause of trouble and its solution
CD CHECK DISC		Focus error	These error codes will be shown if there is any problem with the CD or there is excessive vibration on the vehicle. If the error codes are not displayed when the vehicle is stopped and another CD is inserted, there is a problem with the CD. Check if there is any of the following problems with the CD. Contamination, scratch, or deformation Formation of moisture or grease Repair the CD and insert it again. Then, check that no error appears.
CD DISC ERROR		Abnormal disc
CD INTERNAL E		Mechanical error	This error codes will be shown if there is any internal mechanical or electrical problem in the radio and CD player. Replace the radio and CD player check that no error codes are shown.
CD HEAT ERROR		Protection against high temperature	If the internal temperature is extremely high, this error code will be shown. Turn off the radio and CD player and wait audio until they cool down. Wait for a while, and then turn on the radio and CD player again. Check that the same error does not appear.
USB FILE ERROR		File error	Displayed when an unsupported file is attempted to play. Change it with a supported file.
USB USB BUS PWR		Overcurrent abnormality	Displayed if there is any problem in the VBUS terminal of the radio and CD player. Turn off the radio and CD player. Wait for a while, and then turn on the radio and CD player again. If the error code does not disappear, proceed to "The USB data cannot be replayed" (Refer to ).
USB LSI ERROR		USB internal error	Displayed if there is any problem in the USB-LSI in the radio and CD player. Turn off the radio and CD player. Wait for a while, and then turn on the radio and CD player again. If the error code is displayed, replace the radio and CD player.
USB UNSUPPORTED FORMAT		Unsupported format	Displayed when the file format stored in the USB device is not supported. Use a supported file format.
USB UNSUPPORTED DEVICE		Unsupported device	Displayed when an unsupported USB device is connected. Change it with an supported USB device.
iPod NO SONG		No playable music file is found.	No playable music file is stored in the iPod. Store music files to the iPod®.
iPod VER ERROR		iPod® cannot be recognised	iPod® itself or software is not supported. Use the supported iPod®.
ERROR DC		Detection abnormal output to the speaker	This error code will be shown if the radio and CD player has an internal error or is contaminated with the foreign material, and there is a problem with output to the speaker. If it is contaminated with the foreign material, turn OFF the power. Dry the foreign material if it is liquid, and remove it if it is solid. Then, check if the error code is displayed. If the error code is displayed, replace the radio and CD player.