DIAGNOSIS MODE <VEHICLES WITH 1CD AUDIO>


Enter the diagnosis mode according to the following steps:
1.Turn the Ignition switch to the "ACC" or "ON" position and switch off the radio and CD player.

2.Press the following buttons in that order within sixty seconds from step (1).
(1) [CH1] button.
(2) Rewind button.
(3) Fast-forward button.
(4) [CH4] button.
note
  • When the "Power" button of the radio and CD player is pressed during the diagnosis mode, the diagnosis mode will be cancelled, thus switching off the radio and CD player. However, if the "Power" button is pressed while the hands free-ECU is being updated, the update will not be cancelled.
  • When the "Mode change" button is pressed during diagnosis mode except the hands free-ECU update, the diagnosis mode will be cancelled and relevant operation will be carried out.
  • When an invalid button is pressed during diagnosis mode except the hands free-ECU update, the diagnosis mode will be cancelled, thus switching off the radio and CD player.
  • During the diagnosis mode, voice which is input through the microphone unit is played through a relevant loudspeaker.

3."DIAG MODE" is displayed.
4.When "DIAG MODE" remains displayed for at least two seconds or the "SEL" button is turned clockwise, "Version Info" will be displayed (audio version information display mode). If the "SEL" button is turned clockwise further, the screen will switch to "RADIO DIAG" (radio diagnosis mode), "HFM DIAG" (hands free-ECU diagnosis mode) <vehicles with hands-free interface system>, "DAB DIAG" (DAB version info. indication mode) <vehicles with DAB tuner> in that order.

Audio version information display mode


Displays the hardware version and the software version of the audio system.


Radio diagnosis mode


Turns on and off the S meter display setting mode for the radio. When the S meter display setting mode is turned on, the reception frequency and the field intensity of the radio will be displayed.
note If the ignition switch is turned OFF, the S meter display setting mode will default to off.


Hands free-ECU diagnosis mode


For details of the hands free-ECU diagnosis mode, refer to .

DAB version info. indication mode


Displays the hardware version and the software version of the DAB.