|
Enter the speaker connection check mode according to the following steps:
|
|
1.Turn the Ignition switch to the "ACC" or "ON" position and switch off the radio and CD player.
|
|
2.Press the following buttons in that order within sixty seconds from step 1. (1)
Button A (2)
Button B (3)
Button C (4)
Button D
|
|
With the speaker connection check mode, the connection status of each speaker can be checked based on the sound output from each speaker. The procedure is as follows.
|
|
1.
At the same time with the start of speaker check mode, the sound for speaker connection check is output from the front door speaker (LH) and tweeter (LH).
|
|
2.Press the button D to switch the sound output for speaker connection check from the front door speaker (RH) and tweeter (RH).
|
|
3.Press the button D to switch the sound output for speaker connection check from the rear door speaker (LH).
|
|
4.Press the button D to switch the sound output for speaker connection check from the rear door speaker (RH).
|