DATA LIST REFERENCE TABLE


note Some items are not displayed on M.U.T.-III according to the information in the ECU.
Item No.
M.U.T.-III display
Check condition
Normal condition
200
Original VIN writing status
When writing status is normal
Comp/Unperformed or Comp and locked
When writing status is abnormal
ECU internal Err
201
Current VIN writing status
When writing status is normal
Comp/Unperformed
When writing status is abnormal
ECU internal Err
203
Process error
When no error is present
No error
When error is present
Interrupt error or Switch error or Sequence error or Stick pointer Err or Dispatch call Er or RAM error or Other error
204
Coding counter
-
0-255 times
205
Coding counter Option
-
0-255 times
206
Head lamp LO ON duty
When low-beam headlamps are on
100%
When headlamps (low-beam) are off
0%
207
Fan control relay ON duty
When fan is in operation
100%
When fan is stopped
0%
208
Room lamp ON duty
When room lamp is turned from ON to OFF
Lamp is dimmed from 100% (when ON) to 0%.
209
Gate lamp ON duty
When tailgate is opened
100%
When tailgate is closed
0%
210
IG key illumination
When door is opened
100%
When door is closed
0%
211
Head lamp Hi
When high-beam headlamps are on
ON
When high-beam headlamps are off
OFF
212
Front fog lamp
When front fog lamp is on
ON
When front fog lamp is off
OFF
213
Horn security horn
When security alarm is active
ON
When security alarm is not active
OFF
214
Head lamp washer
When headlamp washer is in operation
ON
Other than above
OFF
215
Security indicator
When security alarm is active
ON
When security alarm is not active
OFF
216
IG1-2 fuel pump
Ignition switch: ON position
ON
Ignition switch: Other than ON position
OFF
218
Tail lamp
When tail lamp and position lamp are on
ON
When tail lamp and position lamp are off
OFF
219
Turn RH/LH lamp
When turn-signal lamp is on
ON
When turn-signal lamp is off
OFF
220
Blower fan relay
Ignition switch: ON position
ON
Ignition switch: Other than ON position
OFF
221
Defogger

  1. Engine: ON (2000 r/min)
  2. Defogger switch: ON

ON
Other than above
OFF
222
Interior lamp cut
When interior lamp is on
ON
When the lamp is turned OFF by the activation of interior lamp automatic shutdown function
OFF
224
Door lock
When locking is performed by central door locking
ON
Other than above
OFF
227
Door unlock
When unlocking is performed by central door locking
ON
Other than above
OFF
228
Dr door unlock
When unlocking is performed by central door locking
ON
Other than above
OFF
230
Gate opener
Tailgate lock release handle: ON
ON
Other than above
OFF
231
Rear fog lamp
When rear fog lamp is on
ON
When rear fog lamp is off
OFF
232
ACC Relay
Ignition switch: ACC or ON position
ON
Ignition switch: Other than ACC or ON position
OFF
233
Fan Lo
When fan is in Lo operation
ON
When fan is stopped
OFF
234
Fan Hi
When fan is in Hi operation
ON
When fan is stopped
OFF
235
Front wiper ACT
When windshield wipers are in operation
ON
Other than above
OFF
236
Front wiper Lo/Hi
When windshield wipers are in high-speed operation
ON
Other than above
OFF
237
Front washer
When windshield washer is in operation
ON
Other than above
OFF
238
Rear washer
When rear washer is in operation
ON
Other than above
OFF
239
Rear wiper
When rear wiper is in operation
ON
Other than above
OFF
240
Power window
Ignition switch: ON position
ON
Ignition switch: OFF position
ON → OFF (30 seconds after turned)
241
Hold mirror open
Door mirror: Opened
ON
Door mirror: Closed
OFF
242
Hold mirror close
Door mirror: Closed
ON
Door mirror: Opened
OFF
243
Dead lock
When dead lock is in operation
ON
Other than above
OFF
244
Independent DRL
When daytime running lamp is on
ON
When daytime running lamp is off
OFF
251
Auto lamp Sensor

  • Displays the voltage of photo sensor. <vehicles without lighting control sensor or vehicles without LDW>
  • Changes depending on the light intensity at the sensor receiver. <vehicles with lighting control sensor or vehicles with LDW>

0- 5 V
252
Ambient temperature sensor
Ignition switch: ON position
0- 5 V
253
Voltage sensing of IOD Line
Always
System voltage
254
IG voltage
Ignition switch: ON position
System voltage
256
Dr door ajar switch
Driver’s door: Open
Open
Driver’s door: Closed
Close
257
As door ajar switch
Front passenger’s door: Open
Open
Front passenger’s door: Closed
Close
258
RR door ajar switch
Rear right door: Open
Open
Rear right door: Closed
Close
259
RL door ajar switch
Rear left door: Open
Open
Rear left door: Closed
Close
260
Gate ajar switch
Tailgate: Open
Open
Tailgate: Closed
Close
262
Room lamp centre ON switch
Not used
OFF
263
Room lamp centre OFF switch
Not used
OFF
264
Handle lock switch
When the ignition key is inserted into the ignition key cylinder
Key in
When the ignition key is removed from the ignition key cylinder
Key out
265
Hazard switch
While hazard switch is pressed
ON
Other than above
OFF
266
Hood switch
Hood: Opened
ON
Hood: Closed
OFF
267
Mirror switch
Remote controlled mirror switch: ON (when the switch is operated)
ON
Remote controlled mirror switch: OFF (when the switch is not operated)
OFF
268
Gate opener switch
Gate opener switch is pressed
ON
Other than above
OFF
270
Dr door lock switch
When driver’s door is locked
Lock
Other than above
Not lock
271
Dr door unlock switch
When driver’s door is unlocked
Unlock
Other than above
Not Unlock
272
As door unlock switch
When front passenger’s door is unlocked
Unlock
Other than above
Not Unlock
273
Except Dr/As door unlock switch
Not used
Unlock
Not Unlock
274
Door key lock switch
Not used
OFF
275
Dr door key unlock switch
Not used
OFF
276
Door key unlock switch
Not used
OFF
277
Power lock switch
Power window main switch (door lock switch): Lock
ON
Other than above
OFF
278
Power unlock switch
Power window main switch (door lock switch): Unlock
ON
Other than above
OFF
279
Brake fluid switch
When brake fluid level is normal
ON
When brake fluid level is low
OFF
280
Washer fluid/Trailer turn SW
Not used
OFF
281
ASC/TCL OFF switch
ASC OFF switch: During ON operation
ON
Other than above
OFF
283
ESS cancel switch
Not used
OFF
287
Starter switch
Ignition switch: START position
ON
Ignition switch: Other than START position
OFF
288
ACC switch
Ignition switch: ACC or ON position
ON
Ignition switch: Other than ACC and ON position
OFF
289
Backup lamp or shift reveres SW
Shift lever is in reverse position
ON
Other than above
OFF
290
Stop lamp switch
Brake pedal depressed
ON
Other than above
OFF
291
Front wiper auto stop switch
When windshield wipers are in operation
ON
Other than above
OFF
292
Rear wiper auto stop switch
When rear wiper is in operation
ON
Other than above
OFF
293
Process error information
-
-
294
Process error counter
-
0-255 times
295
Rear sunroof unlock
Not used
OFF
340
Head lamp switch (tail)
Lighting switch: Position lamp position
ON
Other than above
OFF
341
Head lamp switch
Lighting switch: During dimmer switch operation
ON
Other than above
OFF
342
Head lamp switch (Dimmer)
Lighting switch: High beam position
ON
Other than above
OFF
343
Turn switch left
Turn-signal lamp switch: LH position
ON
Other than above
OFF
344
Turn switch right
Turn-signal lamp switch: RH position
ON
Other than above
OFF
345
Fog lamp ON
Fog lamp switch: During ON operation
ON
Other than above
OFF
346
Fog lamp OFF
Fog lamp switch: During OFF operation
ON
Other than above
OFF
347
Switch type
-
LHD
348
Head lamp switch (auto)
Lighting switch: AUTO position
ON
Other than above
OFF
349
Head lamp cleaner
Not used
OFF
350
Head lamp switch (flasher)
Lighting switch: During dimmer switch operation
ON
Other than above
OFF
351
Column ECU sleep
Ignition switch: Other than ON and START position
OK
Ignition switch: ON or START position
NG
352
Front wiper (INT)
Wiper switch: INT position
ON
Other than above
OFF
353
Front wiper (LO)
Wiper switch: LO position
ON
Other than above
OFF
354
Front wiper (HI)
Wiper switch: HI position
ON
Other than above
OFF
355
Front wiper (washer)
Wiper switch: During washer operation
ON
Other than above
OFF
356
Rear wiper
Wiper switch: Rear wiper
ON
Other than above
OFF
357
Rear wiper (washer)
Wiper switch: During rear washer operation
ON
Other than above
OFF
358
Front wiper (MIST)
Wiper switch: During MIST operation
ON
Other than above
OFF
359
Front wiper (interval volume)
Variable intermittent wiper control switch is switched from (+) to (-).
Value changes from 0 (+) to 254 (-).
360
Wiper switch lever fail
When normal
No fail
When abnormality is present
Fail
361
Turn/Lamp switch lever fail
When normal
No fail
When abnormality is present
Fail
400
Indirect lamp switch
Not used
OFF
401
Indirect lamp
Not used
-
404
FCM switch
FCM switch: Pressed
ON
FCM switch: Released
OFF
405
LDW switch
LDW switch: Pressed
ON
LDW switch: Released
OFF
406
ACC distance switch
Cruise control switch (ACC distance switch): Pressed
ON
Cruise control switch (ACC distance switch): Released
OFF
407
Charging Lid ajar switch
Not used
Open
Close
408
Filler lid Open SW/ECO mode SW
ECO mode switch: Pressed
ON
ECO mode switch: Released
OFF
409
LED Head lamp fail
Not used
-
410
HS power supply voltage
Ignition switch: ON position
5 V
411
Front HS signal voltage
Ignition switch: ON position
0.7 - 4.1 V
412
Rear HS signal voltage
Ignition switch: ON position
0.7 - 4.1 V
413
Front HS initial position
Ignition switch: ON position
5 V
414
Rear HS initial position
Ignition switch: ON position
5 V
415
HS initialization status
The ETACS-ECU initialisation is not implemented.
Not run
The ETACS-ECU initialisation is completed.
Completed
416
A/L indicating voltage ratio

  • Ignition switch: ON position
  • When head lamp is on

0 - 100%
417
A/L actuator line voltage

  • Ignition switch: ON position
  • When head lamp is on

V
418
A/L actuator output voltage

  • Ignition switch: ON position
  • When head lamp is on

V
419
EEPROM error
When no error is present
ON
When error is present
OFF
420
Boot loader Err
When no error is present
ON
When error is present
OFF
421
ADC Error
When no error is present
ON
When error is present
OFF
422
PLL Error
When no error is present
ON
When error is present
OFF
423
IG key illumination fail
Ignition key cylinder illumination lamp: Illuminates
ON
Ignition key cylinder illumination lamp: OFF
OFF
424
Shift Lock solenoid fail
When a problem is present (short to power supply)
ON
Other than above
OFF