REMOVAL AND INSTALLATION


note When the multivision display is replaced, always turn the ignition switch to the "ON" position once and then carry out the operation check.
Pre-removal Operation
  • Centre Panel Assembly Removal (Refer to GROUP 52A - Instrument Panel Assembly ).

Post-installation Operation
  • Centre Panel Assembly Installation (Refer to GROUP 52A - Instrument Panel Assembly ).





Removal steps


1.
Multivision display assembly


2.
Multivision display


3.
CAN box unit assembly


4.
CAN box unit bracket


5.
CAN box unit


6.
Multivision display bracket


7.
GPS antenna