REMOVAL AND INSTALLATION <Vehicles with security alarm sensor>


Pre-removal operation
  • Removal of brake booster assembly (Refer to GROUP 35A - Master Cylinder Assembly and Brake Booster Assembly ) <RHD>
  • Removal of ASC-ECU harness connector (Refer to GROUP 35C- Hydraulic Unit ) <LHD>

 Post-installation operation
  • Installation of brake booster assembly (Refer to GROUP 35A - Master Cylinder Assembly and Brake Booster Assembly ) <RHD>
  • Installation of ASC-ECU harness connector (Refer to GROUP 35C- Hydraulic Unit ) <LHD>




Removal Steps

>>A<<
 1.
 Security alarm siren assembly


2.
 Security alarm siren bracket


3.
 Security alarm siren


4.
 Sub harness

INSTALLATION SERVICE POINT

>>A<< SECURITY ALARM SIREN BRACKET INSTALLATION

Use the earth bolts as the mounting bolts for security alarm siren bracket. The earth bolts have "E" mark on the bolt heads.