Item No.
|
Item name
|
Test contents
|
Set value (M.U.T.-III indication)
|
1
|
Vehicle Speed Off Set 65 Mode
|
Execute this actuator test to allow the system to enter the warning monitor status (standby mode) with the vehicle stationary. By doing this, a simulated vehicle speed of 65 km/h will be set within the set time. If the vehicle is driven under this condition, the simulated speed of 65 km/h will be added to an actual speed.
|
1 min
|
10 min
|
30 min
|
60 min
|
2
|
Standby request output
|
The icon in the combination meter should appear under the warning monitor status (standby mode).
|
V
|
3
|
Warning request output
|
The icon in the combination meter should appear under the warning status (WARNING L-LANE or WARNING R-LANE).
|
Warning R-lane
|
Warning L-lane
|
4
|
TEMP. fail request output
|
The icon in the combination meter should appear when the LDW precheck function is in progress, or the LDW is defective (excluding too hot LDW-ECU and an intermittent malfunction).
|
V
|
5
|
System fail request output
|
The icon in the combination meter should appear under the warning monitor status (standby mode).
|
V
|