Item
|
Display content
|
Message
|
Lamp type
|
Contents
|
Intermittent malfunction detection
|
|
LDW SERVICE REQVIRED
|
LDW warning lamp
|
The following signals, which are received via CAN communication, are
unfeasible.
- Engine-ECU: Vehicle speed signal
- ABS-ECU <vehicles without ASC> or ASC-ECU <vehicles with
ASC>: Yaw rate signal
- Steering wheel sensor: Steering angular velocity signal
- ETACS-ECU: Stop lamp switch signal
|
Trouble detection
|
|
LDW SERVICE REQVIRED
|
LDW warning lamp
|
Refer to the fail-safe functions in "Diagnosis Function" section.
Refer to diagnosis function  .
|
Abnormal temperature detection
|
|
LDW NOT AVAILABLE
|
LDW warning lamp
|
The internal temperature in the LDW camera reaches 85 °C
or more.
|
Operation permission status
|
|
-
|
LDW indicator lamp
|
A green indicator will illuminate when the operation is "permitted".
|
Warning monitor status
|
|
-
|
LDW indicator lamp
|
A green indicator will illuminate when the system has entered the warning
monitor status.
|
Warning status
|
|
LANE DEPARTURE
|
LDW indicator lamp
|
An amber indicator will flash when the system has entered the warning status.
|
When the LDW camera image input compensation is executed, the LDW-ECU
(rain sensor) is initialised or the LDW camera image focus adjustment is executed.
|
|
-
|
LDW indicator lamp
|
A green indicator flashes. For details, refer to how to initialise
the LDW camera and how to adjust the LDW camera image .
|
)
)
)
)
)