|
1.Turn the second lever to the arrow direction.
|
|
2.Turn the first lever to the arrow direction to remove the LDW-ECU.
|
|
1.Remove the protection cap, which is installed on the LDW-ECU, carefully.
2.Install the LDW-ECU to the LDW-ECU bracket. When attaching the LDW-ECU, be careful
not to touch the mounting surface (silicone portion) and hold air bubbles. Just in case that
fingerprints remain on the silicone portion, eliminate it using a plastic tape.
| note |
However, note that the silicone portion is vulnerable.
|
|
|
3.Turn the first lever to the arrow direction.
|
|
4.Turn the second lever to the arrow direction.
|
)
)
)
)
)
)
