CUSTOMIZATION FUNCTION


By operating the M.U.T.-III ETACS system, the following functions can be customised. The programmed information is held even when the battery is disconnected.
Adjustment item (M.U.T.-III display)
Adjustment item
Adjusting content (M.U.T.-III display)
Adjusting content
A/C Recirculation Control
With/without the inside/outside air automatic control function
Disable
No function
Enable
With function (Initial condition)
A/C Switch Control
With/without A/C automatic control function
Disable
No function
Enable
With function (Initial condition)
Eco Mode*
Function to activate ECO mode air-conditioner
Eco
Activates the ECO mode.
Comfort
Deactivates the ECO mode.
A/C Sensible temp. customize
Adjusting mean value for temperature setting
-2
Decreases the control temperature 2°C than the temperature displayed on the LCD.
-1
Decreases the control temperature 1°C than the temperature displayed on the LCD.
0
No change (Initial condition)
1
Increases the control temperature 1°C than the temperature displayed on the LCD.
2
Increases the control temperature 2°C than the temperature displayed on the LCD.
FOOT / DEF Air outlet ratio
Changes air distribution rate for DEF/FOOT vents during manual operation.
Normal
D/F2 (Initial condition)
FOOT > DEF
D/F1(more to FOOT vent): More air flows through FOOT vents.
FOOT < DEF
D/F3(more to DEF vent): More air flows through DEF vents.
FACE / FOOT Air outlet ratio
Changes air distribution rate for FACE/FOOT vents during manual operation.
Normal
B/L2 (Initial condition)
FACE > FOOT
B/L1(more to FACE vent): More air flows through FACE vents.
FACE < FOOT
B/L3(more to FOOT vent): More air flows through FOOT vents.
Auto Rear Defogger(Engine Start)
Activates the rear window defogger when the ambient temperature is low.(The rear window defogger has never been activated since the ignition switch was turned on last time)
Disable
No function (Initial condition)
Enable
With function
note *: Vehicles with ECO switch only