IDLE-UP INSPECTION


1.Before inspection, set the vehicle to the pre-inspection condition.
2.Check that the idling speed is within the standard value range.
Standard value:

    650 ± 100 r/min <4B11, 4J1>
    750 ± 100 r/min <4B12>
    650 ± 50 r/min <4N1>
note The idling speed is controlled by the ISC system automatically, so does not require adjustment.
3.Operate the air conditioner by turning on the A/C switch. Then check that the idling speed is within the standard value range.
Standard value:

    700 ± 100 r/min <4B11>
    800 ± 100 r/min <4B12>
    750 ± 100 r/min <4J1>
    850 ± 50 r/min <4N1>