|
1.
caution |
Do not heat than necessary.
|
Immerse the refrigerant temperature sensor probe into engine oil to heat the sensor probe.
|
|
2.If the oil temperature reaches the standard value, there should be continuity between
the switch terminals. Standard value:
|
Switch status
|
Operating temperature °C
|
Being turned off (No continuity)
|
135
|
Being turned on {
Continuity exists (2 Ω
or less)}
|
120
|
|
note |
When the oil temperature is 135°C or more and there is no continuity, the switch
will not be turned on {Continuity exists (2 Ω
or less)}
until the
temperature reduces to 120°C or less.
|
|