REMOVAL AND INSTALLATION


Pre-removal and Post-installation OperationDischarging and Recharging refrigerant (Refer to ).




A/C pressure sensor removal steps
<<A>>
1.
 A/C pressure sensor
<<A>>
6.
 O-ring



A/C compressor suction hose removal steps


·
 Dash panel heat protector (Refer to GROUP 42A, Loose Panel ).
<<A>>
2.
 A/C compressor suction hose
<<A>>
6.
 O-ring



A/C condenser outlet pipe and A/C compressor discharge hose removal steps


·
 Air Cleaner Intake Duct Removal and Installation (Refer to GROUP 15 - Air Cleaner <4B1, 4J1>, <4N1>)


·
 Headlamp support panel cover Removal and Installation (Refer to GROUP 51, Front Bumper and Radiator Grille ).
<<A>>
 >>A<<
 3.
 A/C compressor discharge hose
<<A>>
6.
 O-ring


4.
 Clamp
<<A>>
5.
 A/C condenser outlet pipe
<<A>>
6.
 O-ring



Expansion valve removal steps


·
 Dash panel heat protector (Refer to GROUP 42A, Loose Panel ).
<<A>>
2.
 A/C compressor suction hose connection (at heater assembly side)
<<A>>
6.
 O-ring
<<A>>
5.
 A/C condenser outlet pipe connection (at heater assembly side)
<<A>>
6.
 O-ring


7.
 Expansion valve cover <4N1>
<<A>>
8.
 Expansion valve

REMOVAL SERVICE POINT

<<A>> HOSE AND PIPE REMOVAL
caution Use the plug which is not breathable because A/C compressor oil or receiver have high hygroscopicity.
Plug the nipple of condenser, compressor, and expansion valve to prevent the entry of dust and dirt.

INSTALLATION SERVICE POINT

>>A<< A/C COMPRESSOR DISCHARGE HOSE INSTALLATION
Assemble the clamp into the condenser assembly, and then assemble the A/C condenser discharge hose into the clamp.