REMOVAL AND INSTALLATION


Pre-removal and Post-installation Operation
  • Discharging and Recharging refrigerant (Refer to ).
  • Air Cleaner Intake Duct (Refer to GROUP 15 - Air Cleaner <4B1,4J1>, <4N1>).
  • Headlamp support upper panel cover (Refer to GROUP 51, Radiator Grille )
  • Hood latch (Refer to GROUP 42A - Hood ).
  • Headlamp support panel upper (Refer to GROUP 42A - Loose Panel ).




Removal steps
<<A>>
 >>A<<
 1.
 A/C compressor discharge hose connection


2.
 O-ring


3.
 Clamp
<<A>>
4.
 A/C condenser outlet pipe connection


5.
 O-ring


6.
 Condenser assembly
note Condenser fan removal and installation refer to GROUP 14 - Radiator <4B1, 4J1>, <4N1>.

REMOVAL SERVICE POINT

<<A>> A/C COMPRESSOR DISCHARGE HOSE AND A/C CONDENSER OUTLET PIPE DISCONNECTION
caution Use the plug which is not breathable because A/C compressor oil or receiver have high hygroscopicity.
Plug the removed nipple of the pipe, hose and condenser to prevent the entry of dust and dirt.

INSTALLATION SERVICE POINT

>>A<< A/C COMPRESSOR DISCHARGE HOSE INSTALLATION
Assemble the clamp into the condenser assembly, and then assemble the A/C condenser discharge hose into the clamp.