REMOVAL AND INSTALLATION



Removal steps


1.
 Bracket


2.
 Heat shield

>>D<<
 3.
 Oil supply line


4.
 Connection


5.
 Seal


6.
 Connection


7.
 Oil return line

>>C<<
 8.
 Gasket


9.
 Seal

>>B<<
 10.
 Turbocharger

>>A<<
 11.
 Support


12.
 Gasket

INSTALLATION SERVICE POINT

>>A<< SUPPORT INSTALLATION
Install support to turbocharger.
note
  • Between turbocharger and cylinder block.
  • First hand tighten all bolts.

>>B<< TURBOCHARGER INSTALLATION
Install turbocharger to cylinder head.
note Can only be renewed together with exhaust manifold and vacuum unit.

>>C<< GASKET INSTALLSTION
Install gasket to turbocharger.
note Note installation position.

>>D<< OIL SUPPLY LINE INSTALLATION
Install oil supply line to turbocharger.
note
  • Before installing oil supply line, ensure that it is not blocked.
  • Before installing, fill turbocharger with engine oil through oil supply line connection.