REMOVAL AND INSTALLATION



Removal steps


1.
 Cap


2.
 Seal


3.
 Crankcase breather

>>A<<
 4.
 Cylinder head cover


5
 Cylinder head cover gasket


6.
 Lifting eye


7.
 Cable channel


8.
 Gasket


9.
 Tandem pump


10.
 Camshaft position sensor

INSTALLATION SERVICE POINT

>>A<< CYLINDER HEAD COVER INSTALLATION
note
  • Before fitting, thoroughly clean sealing surface of cylinder head with clean cloth.
  • Renew cylinder head cover gasket and seal for bolts if damaged.
1.Screw on cylinder head cover hand tight in the sequence 1 to 11.

2.Tighten bolts to the specified torque of 10 N·m in the sequence 1 to 11.