REMOVAL AND INSTALLATION







Removal steps


1.
Retaining clip
<<A>>
>>A<<
2.
Oil supply line


3.
Bracket

REMOVAL SERVICE POINT



<<A>> OIL SUPPLY LINE REMOVAL


1.Loosen union nuts on oil filter bracket and turbocharger.
2.Loosen securing bolts for retaining clips.
3.Remove oil supply line.

INSTALLATION SERVICE POINT



>>A<< OIL SUPPLY LINE INSTALLATION


note The procedure must be followed to ensure that oil supply line is installed tension-free.
1.Loosen securing nut on retainer.
2.Start union nuts for oil supply line on connections.
3.Tighten union nut "B" on oil filter bracket hand tight.
4.Now tighten union nut "A" on turbocharger hand tight.
5.First tighten union nut "B" on oil filter bracket and then union nut "A" on turbocharger to the specified torque of 22 N·m.
6.Attach retaining clips to brackets and tighten securing bolts to the specified torque of 10 N·m.
7.Tighten securing nut to the specified torque of 25 N·m.