ENGINE OIL REPLACEMENT


1.Start the engine and allow it to warm up until the temperature of the coolant reaches 80 °C to 90 °C.
2.Remove the engine oil filler cap.

3.
caution Use care as engine oil could be hot.
Remove the engine oil pan drain plug to drain engine oil.
4.Tighten the engine oil pan drain plug to the specified torque.
Tightening torque: 30 N·m
5.Install the lid of the lower under cover panel R.H.
6.Refill with specified quantity of engine oil.

    Specified Engine Oil: VW 50501/50601 or higher
    SAE viscosity number: 0W-30
    Total quantity (Includes volume inside engine oil filter): 5.5 L
7.Install the engine oil filler cap.
8.Check engine oil level.