|
1.Remove the second seat assembly (Refer to GROUP 52A -
Second Seat Assembly
Removal and Installation ), and turn up the floor mat.
|
|
2.Remove the rear floor fuel gauge maintenance hole cover (RH).
|
|
3.Disconnect the fuel tank gauge unit connector.
|
|
4.
caution |
Pay attention not to damage the gauge unit and the float of the fuel tank
gauge unit when withdrawing it from the service hole.
|
Remove the fuel tank gauge unit mounting nuts and remove the fuel tank gauge unit from
service hole. 5.Replace the fuel tank gauge unit gasket with a new one. 6.
caution |
Pay attention not to damage the gauge unit and the float of the fuel tank
gauge unit when installing it to the fuel tank through the service hole.
|
Install the fuel tank gauge unit to the fuel tank through the service hole, and tighten
the mounting nuts. 7.Connect the connectors of the fuel tank gauge unit. 8.Install the floor inspection lid (RH). 9.Install the second seat assembly. (Refer to GROUP 52A -
Second Seat Assembly
Removal and Installation ).
|