|
1.Use the following special tools to check the radiator condenser tank cap valve opening
pressure.
- Radiator cap tester (MB992193)
- Radiator cap tester adapter set (MB992190)
- A: Radiator cap tester adapter
2.
note |
Be sure that the cap is clean before testing. Rust or other foreign material on the cap
seal will cause an improper reading.
|
Use the special tool (MB992190) to attach the radiator condenser tank cap to the special
tool (MB992193). 3.Increase the pressure until the indicator of the gauge stops moving. Standard value: 93 -
123 kPa 4.If not within the standard value, replace the radiator condenser tank cap.
|