REMOVAL AND INSTALLATION



Pre-removal operation
  • Coolant Draining (Refer to .)
  • Battery and Battery Tray Removal.

Post-installation operation
  • Battery and Battery Tray Installation.
  • Coolant Refilling and Check (Refer to .)





Radiator removal steps


·
Air Cleaner Intake Duct (Refer to GROUP 15 - Air Cleaner )


1.
Radiator drain plug


2.
Radiator O-ring


3.
Bypass hose
<<A>>
>>A<<
4.
Radiator upper hose


5.
Hose upper pipe
<<A>>
>>A<<
6.
Radiator upper hose
<<A>>
>>A<<
7.
Radiator lower hose
<<A>>
>>A<<
8.
Radiator lower hose


9.
Bypass hose


10.
Bypass hose


11.
Condenser fan motor connector


12.
Radiator fan motor connector


13.
Fan, fan motor, fan shroud assembly


·
Radiator grille, headlamp support upper panel cover (Refer to GROUP 51 - Radiator Grille .)


·
Hood lock release cable, hood switch (Refer to GROUP 42 - Hood .)


14.
Front end upper bar assembly


15.
Radiator assembly


16.
Support upper insulator


17.
Support lower insulator


18.
Cap


19.
Radiator condenser tank hose


20.
Radiator condenser tank


21.
Radiator condenser tank bracket


22.
Radiator condenser tank bracket


23.
Condenser fan motor


24.
Fan


25.
Radiator fan motor


26.
Fan


27.
Fan shroud



Fan shroud removal steps


3.
Bypass hose


4.
Radiator upper hose


5.
Hose upper pipe


6.
Radiator upper hose


7.
Radiator lower hose


8.
Radiator lower hose


9.
Bypass hose


10.
Bypass hose


11.
Condenser fan motor connector


12.
Radiator fan motor connector


13.
Fan, fan motor, fan shroud assembly


23.
Condenser fan motor


24.
Fan


25.
Radiator fan motor


26.
Fan


27.
Fan shroud

REMOVAL SERVICE POINT



<<A>> RADIATOR UPPER HOSE/RADIATOR LOWER HOSE REMOVAL



Make mating marks on the radiator hose and hose clamp before removal.

INSTALLATION SERVICE POINT



>>A<< RADIATOR LOWER HOSE/RADIATOR UPPER HOSE INSTALLATION



1.Insert the hose to the protrusions at both radiator and engine sides.
2.Align the mating marks of the radiator hose and hose clamp, then install it.