REMOVAL AND INSTALLATION


caution Do not replace the ECM and the ETACS-ECU simultaneously. Always replace either one of the ECUs first, and register the encrypted code (Refer to GROUP 42C, Diagnosis - ID Code Registration Necessity Judgment Table ). Then, replace the other ECU.




Auto-cruise control switch removal steps


1.
 Driver’s air bag module (Refer to GROUP 52B - Air Bag Modules and Clock Spring ).


2.
 Auto-cruise control switch



Control unit removal


3.
 Engine-ECU [Refer to GROUP 13A - Engine-ECU ].



Sensor removal


4.
 Accelerator pedal [built-in accelerator pedal position sensor (APP sensor)] (Refer to ).


5.
 Stoplight switch (Refer to GROUP 35A - Brake Pedal ).


6
 Clutch switch (Refer to GROUP 21A - Clutch Pedal ).