|
1.Measure the clutch pedal looseness (A).
Standard value (A): 1.5 mm or less
2.When the clutch pedal looseness is not within the standard value, the clutch pedal
assembly or the clutch master cylinder may be faulty. In this case, check the clutch pedal assembly
or the clutch master cylinder, and replace it if necessary.
3.Turn up the floor carpet under the clutch pedal.
|
|
4.Check that the clutch pedal height (B) and the clearance (C) between the clutch pedal
and the toe board when the clutch is disengaged are within the standard value.
Standard value (B): 151 ±
3 mm
Standard value (C): 77 mm or more
5.When the clutch pedal height and the clearance between the clutch pedal and toe board
when the clutch is disengaged are not within the standard value, the air may be intruded into
the hydraulic system, or either the clutch master cylinder or the clutch release cylinder may
be faulty. In this case, perform air bleeding, or check the clutch master cylinder or the clutch
release cylinder, and replace it if necessary.
|
)
)
)