REMOVAL AND INSTALLATION

Pre-removal Operation

Clutch Fluid Draining

Post-installation Operation

Clutch Fluid Supplying
Clutch Line Bleeding (Refer to ).
Clutch Pedal Adjustment (Refer to ).

<L.H. drive vehicles>

			Clutch master cylinder removal steps
		1.	Reservoir hose and brake fluid reservoir connection
		2.	Clutch tube assembly A
		·	Clutch pedal assembly (Refer to ).
<<A>>		3.	Clutch master cylinder
			Concentric slave cylinder removal steps
		4.	Clutch tube assembly B
		5.	Holder
		·	Transmission assembly (Refer to GROUP 22A, Transmission assembly ).
<<B>>	>>A<<	6.	Concentric slave cylinder adapter
<<B>>	>>A<<	7.	Concentric slave cylinder
			Clutch line removal steps
		2.	Clutch tube assembly A
		4.	Clutch tube assembly B

<R.H. drive vehicles>

			Clutch master cylinder removal steps
		1.	Reservoir hose and brake fluid reservoir connection
		2.	Clutch tube assembly A
		3.	Clutch master cylinder
			Concentric slave cylinder removal steps
		4.	Clutch tube assembly B
		5.	Holder
		·	Transmission assembly (Refer to GROUP 22A, Transmission assembly ).
<<B>>	>>A<<	6.	Concentric slave cylinder adapter
<<B>>	>>A<<	7.	Concentric slave cylinder
			Clutch line removal steps
		2.	Clutch tube assembly A
		4.	Clutch tube assembly B
		8.	Clip

REMOVAL SERVICE POINT

<<A>> CLUTCH MASTER CYLINDER REMOVAL <L.H. DRIVE VEHICLES>

Remove the clutch master cylinder from inside the vehicle.

<<B>> CLUTCH TUBE CONNECTION/CONCENTRIC SLAVE CYLINDER ADAPTER/CONCENTRIC SLAVE CYLINDER REMOVAL

caution

Do not remove the O-rings and the clips from the clutch tube, the concentric slave cylinder adapter and the concentric slave cylinder.
If the O-rings or the clips of the clutch tube, the concentric slave cylinder adapter and the concentric slave cylinder are damaged, replace each assembly.

INSATALLATION SERVICE POINT

>>A<< CONCENTRIC SLAVE CYLINDER/CONCENTRIC SLAVE CYLINDER ADAPTER/CLUTCH TUBE CONNECTION INSTALLATION

caution

Check that the O-rings and the clips are not damaged before installing the clutch tube, the concentric slave cylinder adapter and the concentric slave cylinder.
If the O-rings of the clutch tube, the concentric slave cylinder adapter and the concentric slave cylinder and their installation positions are contaminated, clean with the clutch fluid before installation.