)
- Front hub and flange yoke holder (MB990767)
- Hub bolt remover (MB991618)
| 1.Remove the caliper assembly and suspend it with wire so that it does not fall. |
| 2.Remove the brake disc. |
|
3.Use the following special tools to remove the hub bolts.
|
) |
4.Install the plain washer to the new hub bolt, and install the bolt with a nut. 5.Install the brake disc, caliper assembly and tighten the caliper assembly mounting bolts to the specified torque. Tightening torque: 100 ± 10 N·m |