)
3.If the gear oil level is not between the upper limit and lower limit, addthe specified gear oil below the bottom of filler plug.
4.Tighten the filler plug to the specified torque.
Tightening torque: 32 ± 2 N·m
| 1.Remove the filler plug. |
|
2.Check that gear oil level is not 8 mm below the bottom of filler plug hole. 3.If the gear oil level is not between the upper limit and lower limit, addthe specified gear oil below the bottom of filler plug. 4.Tighten the filler plug to the specified torque. Tightening torque: 32 ± 2 N·m |