SPECIAL TOOL


Tool
 Number
 Name
 Use


MB991955
A: MB991824
B: MB991827
C: MB991910
D: MB991911
E: MB991825
F: MB991826
 M.U.T.-III sub-assembly
A: Vehicle communication interface (V. C. I)
B: USB cable
C: M.U.T.-III main harness A (applicable to vehicles with CAN communication)
D: M.U.T.-III main harness B (applicable to vehicles without CAN communication)
E: Measurement adapter
F: Trigger harness
 Check of the electronic control 4WD (the diagnosis code display, service data display, freeze frame data display, actuator test with M.U.T.-III)
caution For vehicles with CAN communication, use the M.U.T.-III main harness A to send the simulated vehicle speed. If you connect the M.U.T.-III main harness B instead, the CAN communication does not function correctly.


MB991223

    A:MB991219
    B:MB991220
    C:MB991221
    D:MB991222
 Wiring harness set

    A:Check harness
    B:LED harness
    C:LED harness adapter
    D:Probe
 Continuity check and voltage measurement at the 4WD-ECU wiring harness connector


MB992006
 Extra fine probe